| IT | Active Components | MPS | |||
Monolithic Power Systems (MPS), founded 1997 in California, and Azzurri
Technology announce a partnership in Europe. MPS is a leading supplier
for innovative products in the sector of analog/mixed signal ICs,
powering the following target applications: computing sector (PDAs,
Notebooks, LCD-Monitors), consumer sector (LCD- and Plasma-TV,
DVD-receiver, Set-Top-Boxes, portable DVD-Player), wireless- and
telecom-applications (GPS-Receiver, Smart-Phones, Access-Points,
DSL-Modems etc.)
Minimal Losses! Switched-Mode DC/DC-Step-Down-Converter
The cost-effective integrated Step-Down-Switchers of MPS offer, compared to LDO-solutions, higher current, higher efficiency and a higher voltage-threshold. By integrating a lot of special functions like soft-start, thermal-shutdown, internal current limit, under-voltage lockout etc. external circuitry is minimized and board-space can be saved.
Bring on the Light! MPSs Family of driver ICs for white LEDs and Flash-LEDs
No matter if you need to power complete strings of LEDs, e.g. for display-backlight, or Falsh LEDs in mobile phones or PDAs – MPSs LED driver family always offers you the best choice.
Input-voltages between 2,5 an 36VDC and currents up to 4A allow for different applications at extremely high brightness. MP1517 for example is specialized for driving the ultra-bright FLASH-LEDs like LUMILEDS™ Luxeon- or OSRAMs Golden Dragon™ - family, allowing by the use of the tiny QFN16-package (4 x 4 mm) and a lot of integrated functions the usage in even the smallest portable applications.
- 3A Peak Current Limit
- Low 700mV Feedback Threshold
- >93% Efficiency
- Zero Current Shutdown Mode
- Under Voltage Lockout Protection
- Soft Start Operation
- Thermal Shutdown
- 4 mm x 4 mm x 0,9 mm (BxTxH) QFN Package
CCFL Drivers
CCFL-Driver with input-voltages ranging from 1-32V
for powering up to 30 tubes with a current deviation of not more than 2%.
White LED Drivers
LED-Driver for white LEDs at input-voltages
between 2,5 and 36V, powering strings of up to 4 Flash-LEDs or 3 strings
of up to 6 standard-LEDs.
Step-Up DC/DC-Converter with input-voltages between 2,5 and 25V with integrated features, e.g. for powering TFT-LCD-Panels.
Step-Down DC/DC Converter
Step-Down DC/DC-Converter with input-voltages
between 2,5 and 32V with integrated soft-start and efficiencies > 90%.
Mono / Stereo single ended or bridge 20W - 70W output power. High efficiency single supply rail operation
Contact Us
For further information on MPS please click here